C400e Nebulizer

Description

Description

C400e Nebulizer

IMPORTANT – For use only with the ESI FAST System

Thread on body connects directly to ESI FAST connector. Uptake line and connector are NOT included. To use in free aspiration mode or with a peri pump instead of the ESI FAST system, simply add a C250s uptake line e.g. 830-081, 830-082, 830-084, 830-086. All these uptake lines connect directly to the C400e body.

General purpose (non-semiconductor) PFA nebulizer for ICP-MS. High sensitivity with high solids capability – up to 15% TDS. Robust – can be backflushed; no cleaning tools needed. 6 mm OD body with 4 mm gas port. C-Flow Gas Line Connection Kit Part 830-051 is included. Free aspirates but designed to be pumped (flow rate range of 0.2 – 0.7 mL/min). Optimized at 1 SLPM Ar flow rate. Note: This nebulizer is designed for use only with standard sample introduction systems (ambient temp or chilled spray chamber). Where a desolvator is used, a nebulizer type “Nebulizer for Desolvators” must be selected.

Specifications:

• Uptake Rate µL/min: 400
• For Desolvator Use: No
• Dimensions:
• A: 3.09 inches (78.5 mm)
• B: 0.24 inches (6.0 mm)